The Dart Systems Pipe Tracer (Flexitrace) provides a lightweight and compact solution for locating ducts, pipes and drains.
The unit can easily be transported and deployed by one person and
provides an alternative to traditional pipe location techniques using
a Cobra Rod / Duct Rod’s and a Sonde Transmitter for the location of plastic pipes, pipe / duct obstructions or collapses.

Sonde Location
Feed the rod into the duct and attach a Signal Generator to both
terminals of the unit, this energises the end coil housing and allows it to be located as a traditional Sonde using a Cable Avoiding Tool.

Line Location
Feed the rod into the duct and attach a Signal Generator to one
terminal of the unit and the other terminal to an earth stake.
The Rod can then be located along its whole length with a Cable
Avoiding Tool.

Features

• Allows the detection, location and determination of depth for buried non-metallic pipes and ducts to a depth of 3 Mtrs
• Locate either the whole path of the pipe or only locate the tip of the Sonde.
• Works in pipes and ducts with a diameter as small as 12 mm Diameter
• Works with standard Signal Generator and C.A.T. (Cable Avoiding Tool)
• Manual brake fitted to maintain control of the rod
• No batteries required
• Lightweight and compact

Construction
Rod Diameter: 4.5mm
Sonde Dimensions: 9mm Dia x 75mm
Depth Range: Up to 3 Mtr depending on pipe construction and soil conditions.
Construction: Glass Fibre Rod and copper conductors in a polypropylene sheath on a steel frame.
Frame Dimensions: 540mm x 400mm x 150mm
Warranty: 12 Months

Part        Length     Diameter     Core Dia.    Min Bend Radius     Weight
300-30   30M         4.5mm         3mm           300mm                    4kg
300-50   50M         4.5mm         3mm           300mm                    5kg
300-80   80M         4.5mm         3mm           300mm                    6kg